BackDoor:
http://192.168.100.1
http://192.168.100.1/cgi-bin/adv_pwd_cgi
+ System
- HW_REV
- BOOTR
- SW_REV
- MODEL: TG862G
+ Serial Number
+ Firmware Name
+ Firmware Build Time
+ eSAFE 0 FW Revision
Advanced Login:
password of the day ---> http://tylerwatt12.com/potd/ or borfast.com
default pass router ---> password or Claro2014 or Uq-4GIt3M
Terminal:
telnet 192.169.0.1
default pass router ---> password or Claro2014 or Uq-4GIt3M
help
Directory Commands ->
setRouteMode : set bridge / router / natroute mode
setWanIp : set static / dynamic IP address info
setWanGateway : set default Gateway
setWanDns : set DNS for gateway
showWan : show configured IP information
setDhcpEnable : set DHCP enable
setDhcpPool : set MAX/MIN DHCP address pool
setLanIp : set lan IP address / mask
addLanIp : add new lan IP address
editLanIp : edit existing lan IP address
delLanIp : delete lan IP address
setLanDns : set DNS for hosts
showLan : show configured LAN information
setTACACSServer : set TACACS+ server and port
setTACACSSecret : set TACACS+ secret
showTACACS : show configured TACACS+ information
setRipEnable : set RIP enable
setRipIp : set RIP IP Address
setRipKeyId : set RIP Key ID
setRipAuth : set RIP authorization mode / password
setRipDhcpEnable : set Dhcp enable on routed network
showRip : show configured RIP information
setRipLogMask : set RIP log mask
showRipLog : enable RIP logging
setFwRule : Create a firewall rule
delFwRule : Delete a firewall rule
showFwRules : show all set firewall rules
setHttpWanAccess : set Access to web interface from WAN
setHttpLanAccess : set Access to web interface from LAN
showHttpAccess : show configured Http access
setEthernet : set Ethernet Port Configuration
showEthernet : show configured Ethernet information
showStatus : show all status information
setDefaults : reset settings to factory default
commit : commit changes
!reset : Reset Modem
help : Display commands
!logout : Disconnect telnet/SSH
quit : Quit the CLI
+More Info: https://w00tsec.blogspot.com/2015/11/arris-cable-modem-has-backdoor-in.html
